300-500kg/h CO Extrusion Dog Treat Manufacturing Equipment
300-500kg/h CO Extrusion Dog Treat Manufacturing Equipment
I. Introduction of CO Extrusion Pet Chews/Treat
CO extruded pet chews typically consist of two-part extrudates from two different formulations. Each formula provides some kind of outstanding chewing effect to pets. For example, under the premise that the two parts of a CO extruded pet chew have all the basic properties expected from a chew such as long-last chewiness and good palatability, then at the same time one part of the formula may be dedicated to freshening breath, and the other part is dedicated to supplementing extra nutrients; or one part may have antibacterial effect, and the other part has the good meaty smell to increase the pet’s attention, etc.
Co-extrusion pet chews are made by co-extrusion technology. Two single screw extruder machine are used to handle different formulas simultaneously. The extrudates from the two pet food extruder were then co-extruded at the final die. In additiona to CO extrusion, regular single-color or single-recipe chews can be produced once the pet treat extruder machine is used alone.
II. Parameters of 300-500kg/h CO Extrusion Dog Chews Treat Manufacturing Equipment
Capacity | 300-500 kg/h |
Energy/Power | -Electric heating:
Installed power 177 kw -Other heating option: Natural gas/Diesel by burner or steam boiler |
Installed Area | 130 square meters |
Material | Corn/potato starch, dry vegetable powder, dry/wet/frozen animal protein source |
III. The General Flow Chart for CO Extrusion Pet Chews Treat Manufacturing
- Step 1: Raw material preparation
- Step 2: Mixing
- Step 3: CO extrusion process
- Step 4: Cooling
- Step 5: Cutting
- Step 6: Drying
- Step 7: Measuring and packing
IV. Components of 300-500 kg/h CO extrusion Dog Chews Treat Making Machine
- Fresh meat/frozen meat/bone grinder
- Pulverizing system
- Blending machine
- Singe-screw extruder x 2 sets
- Chiller
- Cutting machine
- Drying oven
- Cooling conveyor
- Automatic packing system
- Controlling system (PLC/or instrument control options)
- Complete conveying system
- Burner
Notice:
- Production ofdie-cast chews such as bones and toothbrushes requirestwin-screw extrusion and vertical die-casting processes rather than CO extrusion process.
- When the content of oil and fresh meat in the raw material is high, the Secondary Extrusion Process is required: firstly use a twin-screwdog treat extruderfor precooking, and then continue to use a single-screw dog treat extruder for obtaining high density, chewy, flexible and leathery texture.
Dayi engineers will advise the most suitable dog treat making machine according to your needs.
V. Features of 300-500 kg/h CO extrusion Dog Chews Treat Making Machine
- Finished Food Quality Ensured: Optimal extrusion solution, premium equipment design, and equipment processing ensure high-level and stable production.
- High Output: High designed capacity; minimal material loss;
- Less Energy: High mechanical coordination, low wear; optimized heating, thermal transfer& insulation details, low heat loss
- Low Production Cost: Flow production, precise control of each process
- Simple and Low Cost Maintenance: Modular structure, easy operation. Lifetime after-sales service
- Safe Material: High-quality food-safe materials for all food contact part
- Failure Rate: Nearly zero failure as long as preventive maintenance