300-500kg/h CO Extrusion Dog Treat Manufacturing Equipment

I. Introduction of CO Extrusion Pet Chews/Treat

CO extruded pet chews typically consist of two-part extrudates from two different formulations. Each formula provides some kind of outstanding chewing effect to pets. For example, under the premise that the two parts of a CO extruded pet chew have all the basic properties expected from a chew such as long-last chewiness and good palatability, then at the same time one part of the formula may be dedicated to freshening breath, and the other part is dedicated to supplementing extra nutrients; or one part may have antibacterial effect, and the other part has the good meaty smell to increase the pet’s attention, etc.

Co-extrusion pet chews are made by co-extrusion technology. Two single screw extruder machine are used to handle different formulas simultaneously. The extrudates from the two pet food extruder were then co-extruded at the final die. In additiona to CO extrusion, regular single-color or single-recipe chews can be produced once the pet treat extruder machine is used alone.

II. Parameters of 300-500kg/h CO Extrusion Dog Chews Treat Manufacturing Equipment

III. The General Flow Chart for CO Extrusion Pet Chews Treat Manufacturing

• Step 1: Raw material preparation
• Step 2: Mixing
• Step 3: CO extrusion process
• Step 4: Cooling
• Step 5: Cutting
• Step 6: Drying
• Step 7: Measuring and packing

IV. Components of 300-500 kg/h CO extrusion Dog Chews Treat Making Machine

1. Fresh meat/frozen meat/bone grinder
2. Pulverizing system
3. Blending machine
4. Singe-screw extruder x 2 sets
5. مبرد
6. آلة قطع
7. Drying oven
8. Cooling conveyor
9. التلقائي نظام التعبئة
10. نظام التحكم (PLC/أو أداة التحكم خيارات)
11. Complete conveying system
12. Burner

Notice:

1. Production ofdie-cast chews such as bones and toothbrushes requirestwin-screw extrusion and vertical die-casting processes rather than CO extrusion process.
2. When the content of oil and fresh meat in the raw material is high, the Secondary Extrusion Process is required: firstly use a twin-screwdog treat extruderfor precooking, and then continue to use a single-screw dog treat extruder for obtaining high density, chewy, flexible and leathery texture.

Dayi engineers will advise the most suitable dog treat making machine according to your needs.

V. Features of 300-500 kg/h CO extrusion Dog Chews Treat Making Machine

• الانتهاء من الطعام ضمان الجودة: الأمثل قذف حل ممتاز تصميم المعدات, معدات تجهيز ضمان مستوى عال ومستقر الإنتاج.
• ارتفاع الناتج: عالية الإنتاجية المصممة; الحد الأدنى من المواد الخسارة ؛
• أقل من الطاقة: ميكانيكية عالية التنسيق ارتداء منخفضة ؛ الأمثل تدفئة, النقل الحراري والعزل التفاصيل ، منخفضة فقدان الحرارة
• انخفاض تكلفة الإنتاج: تدفق الإنتاج, مراقبة دقيقة لكل عملية
• بسيطة ومنخفضة التكلفة الصيانة: هيكل وحدات ، عملية سهلة. عمر بعد-مبيعات الخدمة
• مواد آمنة: عالية الجودة الغذائية-مواد آمنة لجميع الاتصال الغذاء جزء
• معدل الفشل:  ما يقرب من الصفر الفشل طالما الصيانة الوقائية