I. Introduction of Center Filled Corn Pads

Filled Corn Pads are made through adding the chocolate or milk filling process on the basis of extrusion process.

After the cereal dough is cooked and kneaded under certain pressure, temperature and shear, it is extruded through the die of the snack extruder machine to form the outer puffed shell of the corn pads. The die is especially designed. In the center between the inlet and outlet of the die, there is a center-injection channel. Therefore, while the cereal dough is being extruded and formed through the die, at the same time, a center filling machine inkjects the chocolate/milk slurry into the ceter of the extrudate.

II. Parameters of 100-150kg/h Filled Corn Pads Automatic Snacks Making Machine

III. Features

• Finished food quality ensured: الأمثل قذف حل ممتاز تصميم المعدات, معدات تجهيز ضمان مستوى عال ومستقر الإنتاج.
• High output: عالية الإنتاجية المصممة; الحد الأدنى من المواد الخسارة ؛
• Less energy: ميكانيكية عالية التنسيق ارتداء منخفضة ؛ الأمثل تدفئة, النقل الحراري والعزل التفاصيل ، منخفضة فقدان الحرارة
• Low production cost: تدفق الإنتاج, مراقبة دقيقة لكل عملية
• Simple and low cost maintenance: هيكل وحدات ، عملية سهلة. عمر بعد-مبيعات الخدمة
• Material: عالية الجودة الغذائية-مواد آمنة لجميع الاتصال الغذاء جزء
• Failure rate:  ما يقرب من الصفر الفشل طالما الصيانة الوقائية

IV. The General Flow Chart for Center Filled Corn Pads

• Step 1: Mixing of raw materials
• Step 2: Co-Extrusion and cutting to form pillow shape grain shells
• Step 3: Chocolate praline heating and injecting
• Step 4: Drying
• Step 5: Seasoning
• Step 6: Cooling or Drying after seasoning
• Step 7: Packing

V. Components of 100-150kg/h Filled Corn Pads Automatic Snacks Making Machine

1. خلاط
2. Twin screw snack food extruder
3. Chocolate praline heater and filler
4. Belt drying machine (Electric/natural gas/diesel heating options)
5. Seasoning machine
6. Two-Tank syrup sprayer (Optional according to formulation)
7. مجفف
8. Automatic packing machine
9. نظام التحكم (PLC/أو أداة التحكم خيارات)
10. كاملة سيور
11. Other auxiliaries (like chiller, work platform etc.)
12. Steam boiler/burner (Optional)

السادس. المزيد

Multi function

• It only needs to add a center injection machine to the ordinary puffed snack food making machine to produce a variety of center injected puffed snacks. Equipment cost is low.
• By skipping the center injection machine and changing corresponding conveying path, this snacks making machine can make ordinary puffed snacks. So simple operation and maintenance.

المرونة

• Twin screw snack food extruder machine is suitable for a wide range of grain raw materials: processing viscous, oily, sticky or very wet material and some other products. And the processable grain sizes are from fine powder to coarse granules.
• The mold can be replaced onsite to produce puffed pads of different shapes and sizes. The cereal puff surface texture can be either frosted or smooth.
• Injection molds are suitable for fillings of various colors or flavors: syrup, honey syrup, jam, milk, chocolate sauce.